background image

Assembly — Hanging the Fan (optional)

11

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

6b

Single Switch Connections

6c

Dual Switch Connections

     On a single switch the fan and light can be turned on or 

off together. Make wire connections as follows, using the 
wire nuts (BB). 

Wall switch not included.

      

 

From Fan                        To Outlet Box

Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
Green Wires* ---------------- Green or Bare Wire (Ground)

     On a dual switch the fan and light can be turned on or off 

separately. Make wire connections as follows, using the 
wire nuts (BB). 

Wall switch not included.

      

 

From Fan                        To Outlet Box

Black Wire (for Fan) --------- Black Wire (Hot #1)
Blue Wire (for Light) --------- Red Wire (Hot #2)
White Wire ------------------- White Wire (Neutral)
Green Wires* ---------------- Green or Bare Wire (Ground)

BB

SINGLE SWITCH

AC IN

Black

KK

Neutral

Ground

conductor

White

Blue

Black

Green

White

Green

Outlet Box

BB

Neutral

Ground

conductor

White

Blue

Black

Green

White

Green

AC IN

Black

Red

DUAL SWITCH

Outlet Box

A

A

C

C

Summary of Contents for AL958B-BN




















Reviews: