5
HAMPTONBAY.COM
Please
contact
1-855-HD-HAMPTON for further assistance.
Assembly
1
Attaching the legs
2
Attaching the leg support ring
NOTE
: The tile is heavy and may require assistance.
□
Turn the tile table (C) over and carefully place it down on a
soft, non-abrasive surface.
□
Align the holes of a leg (E) with bolt holes on the underside
of the tile table (C). Insert two bolts (I) to loosely attach the
leg (E) to the tile table (C). HAND TIGHTEN THE BOLTS ONLY.
Overtightening the bolts will make it difficult to attach the
leg support ring to complete the assembly.
□
Repeat for the remaining legs (E).
□
Align the holes of the support ring (D) to the holes on the
leg brackets. Insert bolts (I) to attach the legs (E) to the
support ring (D). HAND TIGHTEN THE BOLTS ONLY until all
hardware is in place.
□
When all bolts (I) are in place, tighten them with a Phillips
screwdriver. Be careful not to strip bolts by overtightening.
3
Completing the assembly
NOTE
: The fire bowl is heavy and may require assistance.
□
Carefully turn the assembled stand right side up.
□
Place the bowl (B) in the stand.
□
Place the log grate (F) in the bottom of the fire bowl. Place
the spark screen (A) on the fire bowl.
I
E
C
I
E
D
A
F
B
