background image

10

Mounting the fan

Close-to-Ceiling mounting

 

Align the locking slots of the ceiling canopy (C) with the two 
screws in the mounting bracket (A). Push up to engage the slots, 
and turn clockwise to lock the canopy (C) in place.

 

Firmly tighten the two mounting screws (II).

 

Install the two mounting screws (JJ) (save from Assembly Step 
1 “Preparing for mounting” ) into the holes in the canopy (C) and 
tighten firmly.

 

Install the decorative canopy ring (K) by aligning the ring’s slots 
with the screws in the canopy (C). Rotate the ring counter-
clockwise to lock it in place.

8

WARNING:

 The locking slots of ceiling canopy are provided only 

as an aid to mounting. Do not leave the fan assembly unattached 

until all four canopy screws are engaged and firmly tightened.

WARNING:

 The locking slots of the ceiling canopy are provided only 

as an aid to mounting. Do not leave the fan assembly unattended 

until all four canopy screws are engaged and firmly tightened.

 

Carefully unhook the fan from the mounting bracket (A) and 
align the locking slots of the ceiling canopy (C) with the two 
screws in the mounting bracket (A). Push up to engage the 
slots and turn clockwise to lock the canopy (C) in place. 
Immediately tighten the two mounting screws (II) firmly.

 

Install the two mounting screws (JJ) (save from Assembly 
Step 1 “Preparing for mounting” ) into the holes in the canopy 
(C) and tighten firmly.

 

Install the decorative canopy ring (K) by aligning the ring’s 
slots with the screws in the canopy (C). Rotate the ring 
counterclockwise to lock it in place.

Assembly - Hanging the Fan (continued)

7

Wrapping the extra wire

WARNING:

 When using the standard ball/downrod mounting, the 

tab in the ring at the bottom of the mounting bracket must rest in 

the groove of the hanger ball. Failure to properly seat the tab in 

the groove could cause damage to the wiring.

NOTE:

 Follow this step ONLY if you did not cut the extra 

length from the wires coming from the ceiling fan.

 

Gently wrap the excess wire around the mounting 
bracket.

 

Secure the wires with electrical tape.

E

C

A

II

K

E

C

A

II

K

Summary of Contents for 91126
















Reviews: