6. Finishing the
Installation
Step 1. Tuck connections neatly into ceiling
outlet box.
Step 2. Slide the canopy up to ceiling and
over the two crews on hanger bracket. Rotate
canopy clockwise. Next, while holding the
canopy with one hand, slide the canopy
cover over the screws and rotate clockwise
until tight. Note: adjust the canopy screws as
necessary until the canopy and canopy cover
are snug. (Fig. 14)
Figure 14
Outlet box
Hanger
bracket
Hanger
ball
Canopy
Canopy
cover
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
B
L
U
E
G
R
E
E
N
Figure 13
Diagram indicates optional light kit wiring.
Light
Fan
7. Blade Installation
Step 1.
Attach the fan blades to the blade
holders using the screws and rubber washers
provided, tighten screws securely. (Fig. 15)
Step 2.
Remove rubber stops from motor.
Rotate motor so that the screw holes are
revealed through the opening on switch cap
plate. Align motor holes to blade holders and
secure with screws provided, tighten screws
securely. (Fig. 15)
Screws
Blade holders
Blades
Screws
Rubber
washer
Slot
Tab
Figure 15
