6
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
5
Preassembling the base
6
Attaching the base
7
Pay attention
8
Completing the assembly
□
□
□
□
□
□
□
□
Half tighten each bolt first, fully tighten all the bolts
when 4 bolts attached the 2 arms. Two people working
on this part is recommended.Firstly,tighten all four bolts
half way by aligning in proper position.Tighten
completely afterward.
Place the motion chair right side up.
Place the seat cushion (E) and back cushion (F) on the chair.
This motion chair is now ready for your enjoyment.
Place the chair upside down on the box as illustrated.
Make sure the chair in horizontal plane.
Don't cut the string on the swing before assembled.
Put the base (G) into the surface of the bottom of the seat.
Attach the base (G) to the right arm (D) and the left arm (C).
Cut string in one swing of the base (G). Aligning the built-in
bolts on the base with the holes on the arms. Half tighten
the bolts using the Hex wrench (FF).
Repeat setup 4 for other 3 three swings. Please remind don't
cut the string on the swing before assembled.
FF
E
F
FF
FF
G
□
□