9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Making the electrical connection
Mounting the fan
□
The fan comes with 54 in. lead wires for use with and
extended ball/downrod (B) provided, you can cut the lead wire
to your desired length (no shorter than 12in.) This will make
extra room in the canopy (C). if you do not wish to cut the
wires, you will need to neatly wrap them.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
□
Connect the fan motor white to the household white wire
using a wire connecting nut (BB).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
□
Secure each wire connecting nut (BB) using electrical tape.
□
Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (NN).
□
Align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place.
□
Firmly tighten the two mounting screws (HH).
□
Install the remaining two mounting screws (II) into the holes
in the canopy (C) and tighten firmly.
□
Install the decorative canopy ring (JJ) by aligning the ring’s
slots with the screws in the canopy (C). Rotate the ring
counter-clockwise to lock in place.
6
7
IMPORTANT:
Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
WARNING:
Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
WARNING:
When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the slide-on mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
D
HH
JJ
C
A
Close-to-Ceiling Mounting
□
Carefully unhook the fan from the slide-on mounting bracket
(A) and align the locking slots of the ceiling canopy (C) with
the two screws (HH) in the slide-on mounting bracket (A). Push
up to engage the slots and turn clockwise to lock in place.
Immediately tighten the two mounting screws (HH) firmly.
□
Install the remaining two mounting screws (II) into the holes in
the canopy (C) and tighten firmly.
□
Install the decorative canopy ring (JJ) by aligning the ring’s
slots with the screws in the canopy (C). Rotate the ring
counter-clockwise to lock in place.
□
You may now proceed to attaching the fan blades.
WARNING:
The locking slots of celling canopy are provided only
as an aid to mounting. Do not leave the fan assembly undattended
until all four canopy screws are engaged and firmly tightened.
D
HH
JJ
C
A
Outlet box
in the ceiling
NN
Green or bare wire
Black White
Blue & Black White Green