6
Assembly
1
Assembling the frame
□
Turn the frame (B) on its back. Insert an axle rod (F)
through the axle bushing on the frame (B). Repeat for the
second axle rod (F).
B
F
2
Attaching the tires
□
Place a tire (C) over the axle. Place the axle washer (II) over
the thread, screw on the axle nut (JJ) and tighten securely.
Repeat for each remaining tire.
□
Set the assembly upright on the tires.
C
II
JJ
3
Assembling the galvanized tee
□
Insert the brass swivel (EE) through the sleeve (AA) and
screw the end of the swivel into the galvanized tee (FF).
Using a wrench, tighten the swivel (EE) into the galvanized
tee (FF). Tighten securely but do not overtighten. Over
tightening the swivel could cause leakage.
□
Screw the galvanized tee (FF) assembly onto the spool end
(A) and tighten with a wrench.
A
FF
AA
EE
4
Positioning the spool on the frame
□
Position the spool (A) on the frame so that the galvanized
tee assembly (FF) is on the side of the assembly intended
for the U-handle (D).
A
FF
D