6
Installing the light kit for fans
without pull chains
Installing the light bulbs and decorative
cage for fans with pull chains
□
With the power off, screw two LED bulbs (B) into the light
sockets.
□
Pass the light switch chain through the hole in the decorative
cage (II). Position the decorative cage (II) over the threaded
nipple and raise it up to the light fitter assembly (A).
□
Install the lockwasher (FF) and bottom cover (GG) over the
threaded nipple and tighten them securely.
□
With the power off, screw two LED bulbs (B) into the light
sockets.
□
Pass the light switch chain through the hole in the decorative
cage (II). Position the decorative cage (II) over the threaded
nipple and raise it up to the light fitter assembly (A).
□
Install the lockwasher (FF) and bottom cover (GG) over the
threaded nipple and tighten them securely.
□
Attach the pull chain extension (AA) to the light switch pull
chain.
6
5
Installation (continued)
NOTE:
You must first turn the light on by using
the pull chain prior to using the remote control to
operate the light.
E
A
II
B
AA
FF
GG
II
FF
GG
E
A
B
