![HAMPTON BAY 440-642 Owner'S Manual Download Page 13](http://html.mh-extra.com/html/hampton-bay/440-642/440-642_owners-manual_587893013.webp)
NOTE
: Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box.
(Turning power off using fan switch is not
sufficient to prevent electric shock.)
1. Remove the plug from the center of the
switch box cap.
2. Insert the two wires of light kit into the hole
of switch box cap and thread the switch box
cap onto the center tube of the light it until it
fits snugly. Place a lock washer and a
locking nut over the tube and tighten.
3. Pull down the white and blue wires from the
switch box housing (wires labeled "For
Light") to make wire connections.
4. Connect the white wire from the ceiling
fan to the white wire of the light kit; and
connect the blue wire from the fan to the
black wire of the light kit.
5 . C a r e f u l l y t u c k a l l w i r e s a n d w i r e
connectors into the switch box housing.
6. Attach the switch box cap/light kit
assembly to the switch box housing by
replacing the screws removed in step 1.
7. Mount the glass shades to the light kit by
screwing the plastic screw ring to secure.
8.
Install 3x40W (MAX.) Candelabra bulbs
(included).
Figure 15
Figure 14
9. Installing the Light Kit
Glass shades
Plastic screw ring
Lock nut
Tube
Switch box
housing
Light kit
Locking washer
Switch box cap
White wires
Black wire
Blue wire
Screws
Summary of Contents for 440-642
Page 2: ...Lonestar by Hampton Bay ...