HAMPTON BAY 3022-CM4-SW Use And Care Manual Download Page 5

Page: 5 / 8

Assembly

Attaching the table legs to the table top

Place the chair frame (A) on a flat, solid surface.

Set the swivel base (B) on the chair frame (A). Guide two long bolts (AA) through the holes in the U bar,

and through the holes in the rocker plate, place the metal plate(BB), add a spring (CC) and a nut (DD)

to the bottom of each bolt(AA), Hand tighten the nuts (DD) 3-4 revolutions only.

Repeat the same procedure on the other side of the rocker assembly.

Fully tighten all bolts including screws preassembled by factory. Cover all bolts with bolt covers (EE).

Rocker plate

U bar

Summary of Contents for 3022-CM4-SW

Page 3: ...tity Pre Assembly PLANNING ASSEMBLY HARDWARE INCLUDED Read all instructions before assembly To avoid damaging this product assemble it on a soft non abrasive surface such as carpet or cardboard NOTE More than one person may be required to assemble this product NOTE Hardware not shown to actual size AA BB CC DD EE FF ...

Page 4: ...4 Pre Assembly continued PACKAGE CONTENTS A B C D A B C D Chair frame 2 2 2 2 Back cushion Base Seat cushion Part Description Quantity ...

Page 6: ...e all of the bolts are in place fully tighten the bolts Turn the table right side up Ensure all connections are secure before use Put the umbrella ring cover D into the table top A Ensure the table is tightly assembled and stable before use B C A D ...

Page 8: ...ore returning to the store call Hampton Bay Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday Retain this manual for future use 1 855 HD HAMPTON HAMPTONBAY COM For certification use only Factory Model ID 3022 CM4 SW ...