background image

1

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

PACKAGE CONTENTS

NOTE

: Do not use hammer or mallet. If the 

ground is hard, use water to soften or a trowel 
to loosen the soil.

Attaching and installing the 
light

Connecting the wires

 

Attach the light (A) to the top post (B) by 
twisting the light (A) clockwise into the top 
post (B).

 

Attach the top post (B) to the bottom post (C) 
by twisting the top post (B) in a clockwise 
direction.

 

Attach the stake (E) to the bottom post (C) by 
twisting the stake (E) in a clockwise direction 
into the bottom post (C).

 

Push the stake assembly into the ground while 
grasping the post. Do not push on the light.

 

Mount the wire connector (D) to the lead wire 
from a transformer (not included) by twist-
ing the top of the wire connector (D) off in a 
counterclockwise direction and connecting the 
transformer’s lead wire..

 

Twist the top of the wire connector (D) back on 
in a clockwise direction. Repeat this step for 
each light assembly.

1

2

D

A

B

C

E

IMPORTANT

: Protect the wiring by routing it in 

close proximity to the light, fitting, or next to a 
building structure such as a house or a deck.

IMPORTANT

: Do not bury the wiring by more 

than 6 in. (152mm) in order to connect to the 
main secondary wire.

IMPORTANT

: Do not install the light within 10 ft. 

(3 m) of a pool, spa, or fountain.

D

D

D

Low Voltage LED

Wall Wash Pathlight

Use and Care Guide

ITEM  

#912-359

MODEL #29518

Light

(A)

Top post

(B)

Bottom post

(C)

Wire connector

(D)

Stake

(E)

CAUTION:

 

The wire from the low voltage power 

unit shall be 14-18AWG type underground Low 
Energy Circuit Cable.

CAUTION:

 

Do not submerge in water. The 

product can be damaged.

Assembly and Installation

Reviews: