Figure 14
Bulbs
Light plate
Plate holder
Screws
Screws
Glass shade
Installing the Light Kit 8.
NOTE
: Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box.
Turning power off using the fan switch is not
sufficient to prevent electric shock.
1
.
Attach the light plate to the light plate holder
by feeding the wires (blue and white) out of the
fans through the hole of light plate and then
screw it onto the light plate holder with 3 screws,
be sure to slide the light plate to the 2 screws on
the light plate holder and rotate the light plate
clockwise until tight.
2
. Locate two single white and black wires in the
light plate. Make the polarized plug connections:
-White to white
-Blue to black
3
. Install two 13 Watt compact fluorescent bulbs
(included).
4
. Raise glass shade up against bottom of fan
housing and secure with three screws provided.
5
. Restore power and your light kit is ready for
operation.
6
. If the light kit does not work, turn off the
electricity and lower either canopy or decorative
housing on your ceiling fan to make sure the blue
wire is connected to the black household wire.
NOTE
: Light bulbs have no warranty, can be
purchased at local light bulb specialty store or
from our service center.
