7. Blade
Step 1.
Attach fan blade to the blade
h o l d e r u s i n g t h e s c r e w s p r o v i d e d .
Tighten screws securely. (Fig. 15)
Step 2.
Align holes from blade holder to
motor and secure with 2 screws provided.
Repeat procedure with remaining blades.
(Fig. 15)
Installation
Figure 15
Blade
Blade bracket
Screws
Screws
8. Installing the
Mounting Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes from the mounting
plate over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 16)
Figure 16
Mounting plate
Mounting ring
Screws