10
Blade Balancing
Figure 19
Verify that all blades and blade bracket screws are secure (most fan
wobble problems are caused by loose parts). Once the fan is properly
installed, run the ceiling fan for 10 minutes to let the fan self-adjust.
If wobble occurs after running the fan for 10 minutes, verify blade level
using the following process:
Select a point on the ceiling above the tip of one of the blades, then select
any fan blade and measure from the center of the selected blade to the
point on the ceiling (as shown in Figure 19). Rotate the fan until the next
blade is positioned and repeat the measurement using the same point from
the ceiling for every blade. Measurement deviations should be within 1/8”.
If all deviations are less than 1/8” and the fan continues to wobble, please
call Customer Service (01-800-004-6633) to order a complimentary Blade
Balancing Kit.
If deviation is greater than 1/8”, please call Customer Service
(01-800-004-6633) to order complimentary replacements of your
brackets.
1.
2.
-
-
-
All blades are grouped by weight during assembly. The following procedure
should correct most fan wobble. Check after each step.
Touching Ceiling
