background image

Operation (continued)

 

 

 

 

   

 

   

 

 

WARNING

LIGHTING INSTRUCTIONS 

FOR YOUR SAFETY:
Keep face and body away from burner area 
when lighting.
Ensure burner controls are in the off position. 
Slowly turn on the gas supply valve.

 

 

 

 

 

 

   

 

 

WARNING

FOR YOUR SAFETY:
The propane cylinder is equipped with an excess 

and low heat will be achievable.   

 

 

 

 

 

 

   

 

 

WARNING

FOR YOUR SAFETY:
If the burner does not light within 10 seconds, 
turn the valve off and wait 5 minutes for any gas 
to dissipate before repeating the procedure. 

1.  Press and hold electronic igniter button.

2. Turn the burner control to the low position, press and hold. When the burner 
    lights, release the electronic igniter button. 

3. Continue to depress the burner control knob for 30 seonds and then release. 

5.  If the burner will not light with the electronic igniter, hold a lit long match or
     lit long butane lighter to the ignition area of the burner and continue with 
     step 2. 

6.  To shut down the burner, turn the burner control knob clockwise to the off 
     position. Then turn the gas off at the source (propane cylinder valve). 

     

Normal

 

 

 

 

 

 

   

 

 

WARNING

FOR YOUR SAFETY:

hot for a period after use. 

Allow 45 minutes to cool down before touching 

13

   Igniter-Push 

 Low  

Off

 High  

HOMEDEPOT.COM

Please contact 1-800-841-1350 for further assistance.

 

Summary of Contents for 1006 351 087


















Reviews: