11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Mounting the fan-motor assembly
(standard mount)
☐
Align the locking slots of the canopy (C) with the two screws
(II) and alignment post (QQ) in the mounting bracket (A).
☐
Push up the canopy (C) and turn clockwise until the
alignment post (QQ) engage to the round hole and the
screws (II) engage to the key slots.
☐
Firmly tighten the two mounting screws (II).
☐
Align the oval shape on the canopy (C) with the canopy
bottom cover (HH). Push up the canopy bottom cover (HH)
until the screw (II) heads engage to the slots on the canopy
bottom cover (HH) so that the magnetic canopy bottom
cover (HH) can be attached to the bottom of the canopy (C)
properly.
5
WARNING:
When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket
must rest in the groove of the hanger ball. Failure to properly
seat the tab in the groove could cause damage to the wiring.
4
Wrapping the extra wire
☐
Gently wrap the excess wire around the mounting bracket.
☐
Secure with electrical tape.
NOTE:
Follow this step ONLY if you did not cut the extra
length off from the wires coming from the ceiling fan.
NOTE:
The magnet is pre-attached on the canopy bottom
cover (HH) for you to remove and install easily.
C
HH
II
