11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Attaching the blades to the blade
brackets
2
□
Mount the fan blade (G) to the blade bracket (H) by aligning the
three key-slot holes in the blade (G) with the three posts on the
top of the blade bracket (H).
□
Hold the blade (G) with both hands close to the blade bracket
(H) and press down firmly. Ensure the key-slot holes are
properly seated on the blade bracket (H) posts.
□
While still holding the blade (G) down with both hands, slide
the blade (G) until it engages in the locking mechanism (UU).
Make sure the locking mechanism (UU) at the rear of the blade
bracket (H) springs upward and butts against the edge of the
blade (G), indicating a secure connection.
□
Visually inspect the top of the blade bracket (H) to ensure the
locking mechanism is securely in place.
□
Repeat this procedure for the remaining blades (G).
E
G
UU
H
Assembly - Attaching the Fan Blades
Assembly - Attaching the Switch Cup
Attaching the switch cup
1
□
Remove the four screws (VV) from the switch cup cover
below the fan-motor assembly (E).
□
Connect the wires from fan-motor assembly (E) to the wires
from the switch cup (F) by connecting the 9-pin molded
adaptor plugs together.
□
Align the four holes in the switch cup cover below the fan-
motor assembly (E) with the three holes in the switch cup (F).
Position the switch cup (F) and re-install the three screws
that were removed in first step to secure the switch cup (F).
□
Attach the pull chain extensions (EE) to the fan pull chain.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE:
Notice the location of the fan’s slide switch. This is
the switch used to change the fan’s directional rotation.
For more information on the operation of this switch, see
Operating Your Fan
on page 12.
IMPORTANT:
It is critical to attach the switch cup using the
quick connector. The fan will not operate unless the switch
cup is connected to the fan.
VV
E
F
EE
