9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Attaching the Fan Blades and Brackets
Assembly - Attaching the Light Kit Fitter Assembly
Attaching the blades to the blade
brackets
Attaching the light kit fitter assembly
Fastening the blade assemblies to
the motor
□
Fasten the blade bracket (H) to the motor (B) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (B) and tightening the motor screws attached to the
blade bracket (H).
□
Repeat for the remaining four blade brackets (H).
□
Remove the three screws (QQ) on the black bracket below the
fan- motor assembly (B).
□
Connect the wires from the light kit fitter assembly (E) to the
wires from the black bracket below the fan-motor assembly (B)
by connecting the molded adaptor plugs together.
□
Carefully tuck all wires and splices in the switch cup.
□
Position the switch cup of the light kit fitter assembly (E) on the
black bracket below the fan-motor assembly (B) and align the
three holes in the black bracket.
□
Re-install the three screws removed at the beginning of this
step to secure the light kit fitter assembly (E).
□
Mount the fan blades (G) to the blade bracket (H) by aligning
the three key-slot holes in the blade (G) with the three posts
on the top of the blade brackets (H).
□
Hold the blade (G) close to the blade bracket (H) and press the
blade (G) down firmly. Ensure the key-slot holes are properly
seated on the blade arm posts.
□
While still holding the blade (G) down, firmly slide the blade
(G) away from the bracket (H) side until the blade (G) engages
in the locking mechanism. Make sure the locking mechanism
at the rear of the blade bracket (H) springs upward and
butts against the edge of the blade (G) indicating a secure
connection.
□
Visually inspect the top of the blade bracket (H) to ensure the
locking mechanism is securely in place.
□
Repeat for the remaining blades (G).
5
7
6
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
NOTE:
Your fan blades are reversible. Select the blade side finish
which best accentuates your decor.
IMPORTANT:
It is critical to attach the light kit using
the quick connector. The fan will not operate unless
the light kit is connected to the fan.
B
H
H
G
E
