13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Attaching the Light Kit
Installing the bulbs and attaching the
glass bowl
2
□
Gently slide the glass shade (F) over the steel tensioners
(V V). Make sure the glass shade is fully inserted into the
socket for a secure fit. Repeat for the remaining glass
shades (F).
□
With the power off, insert and tighten the light bulbs (I) into
light kit sockets.
□
Attach the pull chain extensions (BB).
CAUTION:
Over lamping the fan will result in the fan lights
shutting down until the proper wattage bulbs are installed.
Reset the lights by turning off the power, replacing the bulbs
with the correct wattage bulbs, and turn the power on.
BB
E
F
I
D
V V
Operation
Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch controls (XX) the direction of the blades:
Forward (switch down) or Reverse (switch up).
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
NOTE:
Wait for the fan to stop before reversing the direction of
blade rotation.
XX
XX
CAUTION:
Make sure the power is off before attaching or
removing the glass shade.
WARNING
: Allow the glass shade to cool completely before
removing.
A. Warm weather
B. Cool weather
