11 HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Operation (continued)
6
Setting the motion sensor’s
range
The “RANGE” control increases and decreases
the sensitivity of the motion sensor (C) as well as
increases and decreases the distance the motion
sensor (C) will detect movement.
NOTE:
False triggering may happen if the RANGE is set
too high.
□
Adjust the “RANGE” control to increase (MAX)
or decrease (MIN) the sensitivity.
RANGE
ON-TIME
MAX
TEST 1 5
(MINS)
MIN
SYNC
7
Setting the motion sensor’s
on-time
The “ON-TIME” control determines the amount of time
that all motion must be stopped before the motion
sensor (C) will activate the doorbell (A) again.
□
Select the “ON-TIME” setting desired:
□
“TEST” - Motion must be stopped for
10 seconds before reactivation.
□
“1 MIN” - Motion must be stopped for
1 minute before reactivation.
□
“5 MIN” - Motion must be stopped for
5 minutes before reactivation.
RANGE
ON-TIME
MAX
TEST 1 5
(MINS)
MIN
SYNC
8
Selecting a doorbell icon
The doorbell (A) has four channels represented
by icons that glow when a transmitter that is
programmed for that channel is activated.
□
To select a channel, press and hold the button
on the doorbell (A) until the desired icon glows.
Release the button.
□
The selected icon will continue to flash for up
to 30 seconds. Changes can be made to the
selected channel while the icon is flashing.
C
C
