10
Installation – Crystal / Pebble Ember
□
Glass front must be removed and the appliance must be
mounted in its final location before the crystal / pebble
embers are installed.
□
A. Remove the screws on the sides of the fireplace, remove
the glass front, and take out the log set.
□
B. Place the plastic tray to the designed slot.
□
C. CLEAN CRYSTAL or PEBBLE MEDIA: Crystal or pebble media
may have a fine oil residue that needs to be cleaned prior
to installation. Clean them with mild dish soap, drain, rinse
thoroughly and dry before placing into the tray.
□
D. Carefully place crystal or pebble embers into the bottom
tray on the front of the appliance as illustrated. Apply an even
layer from side to side.
Remove the glass front
1
2
Take off
the screws
1
Take off
the screws
Replace to pebbles
or crystal glass (C)
Plastic tray (E)
