8
WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
5
Attaching the Curve Supports
6
Connecting the Big Roof
q
Attach the Curve supports (U) to the Posts (A1) and Cross
beams (D3&D4, E3&E4) using Bolts (KK), Flat washers (BB)
and Spring washers (LL). Tighten the bolts.
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
q
Assemble the Big top connector tubes (J4&J5) with the Big
top connectors (J6) using Bolts (CC) and Flat washers (BB).
Tighten the bolts.
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
7
Attaching the Slanting Beams
8
Attaching the Middle Beams
q
Connect the top of the Slanting beams (H1) with the Big
top connectors (J6) using Bolts (AA) and Flat washers (BB).
q
Connect the bottom of the Slanting beams (H1) with the
Slanting beam connectors (F1) using Bolts (AA) and Flat
washers (BB). Tighten the bolts.
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
q
Connect the top of the Middle beam 2 (I2) with the Big
top long connector tubes (J4) using Bolts (AA) and Flat
washers (BB). Install the Middle beam (I) in the same
way.
q
Connect the bottom of the Middle beam 2 (I2) with the
Middle beam connector 1 (G1) using Bolts (DD), Flat
washers (BB) and Nuts (EE). Install the Middle beam (I)
in the same way.
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
