Assembly — Hanging the Fan (continued)
□
Make sure connections are neatly tucked into the
ceiling outlet box.
□
Slide the canopy (B) up to the mounting bracket (A)
and place the key hole on the canopy (B) over the
loose canopy mounting screw (FF) on the mounting
bracket (A). Turn the canopy (B) clockwise until the
canopy (B) locks in place at the narrow section of the
key holes.
□
Align the circular hole on the canopy (B) with the
remaining hole on the mounting bracket (A). Secure
by tightening two canopy mounting screws (FF).
WARNING:
Make sure the tab on the mounting bracket (A)
properly sits in the groove in the hanger ball / downrod
assembly (D) before attaching the canopy (B) to the mounting
bracket (A) by turning the canopy until it drops into place.
NOTE:
Adjust the canopy mounting screws (FF) as
necessary until the canopy (B) and canopy bottom cover (C)
are snug.
□
Attach the canopy bottom cover (C) to the canopy
mounting screw
(FF)
heads by inserting the screw heads
into the key slots on the canopy bottom cover (C) and
rotating the canopy bottom cover (C) clockwise.
B
FF
C
B
FF
A
C
FF
13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
9
Installing the canopy
10
Attaching the canopy
bottom cover
