Hampshire Controls Corp.
Revision 1.2
Temperature Transmitter Operating Instruction
Page 10 of 21
©2014
Type in the SSID for your wireless network, then
select the proper security settings and enter the
network passphrase.
Contact your System/Network Administrator or IT
professional for any assistance with these settings.
For your convenience, the Temperature Transmitter
performs a network search prior to serving this
page. Any detected networks are displayed under
Available Networks.
Click on Save Settings when you are finished. You
will be returned to the main menu. Select Set IP
Configuration to continue with the network setup.
On this page you must first select “Use static IP”.
After selecting “Use Static IP” you must fill in the
Static IP, Subnet, Gateway, and DNS Server fields.
DHCP is NOT currently supported!
Contact your System/Network Administrator or IT
professional for any assistance with these settings.
Finally, you must enter the IP Address of the
T°Sentry
ALERT
System
server
in
the
Monitoring System IP field.
Click on Save Settings when you are finished. You
will be returned to the main menu. Select Alarm
and Display Settings to configure the Temperature
Transmitter Unit ID and temperature alarm limit
setting.
