8
status;
Charging the equipment for about 10 hoursat the first and the second time, and about 5 hours
later.
[Note]: This tablet adopts a built-in polymer battery. So a special charger is required for charging this
tablet.
During charging, the battery icon on the screen will roll;
After charging completed, the battery icon on the screen will become green and stop rolling;
To extend the service life, it is suggested to chargethe tabletonly after running out of power at
the first and the second use.
[Note]:
1. If you keep the tablet idle for a long time, please ensure tofully charge it once every 3 months
before storing it.
2. When the tablet is on the battery critical low state, you won’t see the charging status before it is
charged for over 20 minutes;
3. The built-in polymer battery must be charged regularly, or it may be damaged due to
over-consumption, whichwill be excludedfrom the quality warranty scope.
Connecting with PC
Use the accompanied USB wire to connect the PC and this tablet, and install corresponding drivers,
and then conduct USB data transmission or charging.
• In the U-disk mode, you can copy and delete documents on the PC.
[Note]: The system will shut down automatically when the battery power is low.
V. Setting Operation Interfaces
1.
Basic operations
Startup
Press and hold the “Power key” for 3 seconds.
Shutdown
Press and hold the “Power key” till the dialog box pops up, and then select the “Shutdown”.
In the sleeping mode, first wake the tablet and then press and hold the “Power key” to shut down.
Power supply reset
