HAMPBACK DSP-1201, Owner'S Manual, Page: 18 / 32

8
0-31 Threshold
Curve
EXP1 、
EXP2
LINEAR
LOG1
、
LOG2
SPLINE
LOUD1 、
LOUD2
A B C
Response threshold
This setting is used to control the relationship between playing strength (strike force) and volume variation.
Adjust this curve until the response is natural enough.
Standard settings.In this setting, the most natural correspondence
between the playing strength and the volume change is presented.
Volume
Hit Strength LINEAR
Compared with LINEA, the heavier hit strength
will make a big difference.
Volume
Hit Strength EXP1
Volume
Hit Strength EXP1
Compared with LINEA, the lighter hit strength
will make a big difference.
Volume
Hit Strength LOG1
Volume
Hit Strength LOG2
Huge response to the hit strength.
Volume
Hit Strength SPLINE
Volume
Hit Strength LOUD2
Volume
Hit Strength LOUD1
Parameter Value
Description
This setting allows a trigger signal to be received only when
the pad is above a determined dynamic level (velocity). This
can be used to prevent a pad from sounding because of
vibrations from other pad.
In the following example, B will sound but A and C will not
sound.When set to a higher value, no sound is produced when the pad is struck lightly. The
response threshold is gradually increased as the pad is struck.
Check this setting and adjust as needed.Repeat this process until you get the perfect setting for
your playing style.
It is easy to maintain a powerful volume
effectwith very light strength response.These
settings will produce a reliable trigger if you
use a drum trigger as an external drum pad.
This setting allows a trigger signal to be received range between peak value with minimum value.
When set to higher value, it will be larger range for the trigger signal.
0-80 DR