HAMOKI VRX1200/330S, Manual

Page: 10 / 13

10
Troubleshooting
If your appliance develops a fault, please check the following table before
call your dealer.
Fault Probable Cause Action
The appliance is not
working.
The unit is not switched on Check the unit is plugged in
correctly and switched on
Plug and lead are damaged Call your agent or qualified
Technician
Fuse in the plug has blown Replace the fuse
Power supply Check power supply
Internal wiring fault Call your agent or qualified
Technician
The appliance turns
on, but the
temperature is too
high/low.
Condenser blocked with dust Call your agent or qualified
Technician
Appliance is located near a heat
source or air flow to the
condenser is being interrupted.
Move the refrigerator to a
more suitable location
Ambient temperature is too high Increase ventilation or move
appliance to a cooler position
Unsuitable foodstuffs are being
stored in the appliance
Remove any excessive hot
foodstuffs or blockages to the
fan
Appliance is overloaded Reduce the amount of food
stored in the appliance
The appliance is
unusually loud
Loose nut/screw Check and tighten all nuts and
screws
The appliance has not been
installed in a level or stable
position
Check installation position and
change if necessary