5
Owner’s Manual
MOUNTING THE EXPRESSION PEDAL
Mounting the EXP-100F or
EXP-50
By use of a #2 Phillips screwdriver, temporarily remove the
screw as shown from the bottom of the EXP. Place the EXP
on top of the Expression Bracket 1. Fasten the EXP to the
front of the bracket as shown using the 2 - M4 x 5mm screws
supplied. Using the screw that you previously removed, fas-
ten the EXP to the bottom of the bracket as shown.
Place the Expression Bracket 1 on top of the XPK-200 as
shown. Fasten the Bracket to the XPK-200 by turning the 2
knob bolts supplied clockwise.
Mounting the EXP-20 or V-
20R
Place the Expression Bracket 1 on top of the XPK-200 as
shown. Fasten the Bracket to the XPK-200 by turning clock-
wise the 2 knob bolts supplied.
Place the EXP on top of the Expression Bracket 1 and route
the cord through the read hole in the Bracket as shown. Place
the Bracket Spacer on the Expression Bracket 1 as shown and
fasten the spacer to the bracket with a #2 Phillips screwdriver
and 2 - ø4 x 8mm screws.
Fasten the EXP to the Expression Bracket 1 by sliding the
Expression Bracket 2 onto the Expession Pedal assembly as
shown and turning clockwith the knob bolt supplied.
M4 x 5 screws
attached on EXP