background image

13

Owner’s Manual

SPECIFICATIONS

XPK-130G

XPK-200G

XPK-200GL

Sound
Generato

r

Virtual Analog Sound Generator (monophonic, 24bit 32kHz)

Keyboards

Velocity-sensitive13-note

Velocity-sensitive 20-note

Velocity-sensitive, wooden 
naturals

 20-note

Connections

DC IN, MIDI OUT, MERGE IN, SOUND IN, LINE OUT 

User 
Controls

VOICE, VOLUME, CUTOFF, RELEASE

Dimensions*2

560(W) x 400(D) x 105(H)mm
22 (W)x 15.7 (D)x 4.1 (H)

872(W) x 400(D) x 115(H)mm
34.3 (W)x 15.7 (D)x 4.5 (H)

872(W) x 560(D) x 115(H)mm
34.3 (W)x 22 (D)x 4.5 (H)

Weight*2

7.7kg, 16lbs

12.7kg, 28lbs

15.4kg, 33lbs

Accessories

AC adaptor
   AD2-1210(120V)/
   AD3-1210(220-240V)
MIDI cable (2.0m)

AC adaptor AD2-1210 (120V)/AD3-1210 (220 - 240V)
MIDI cable (2.0m)
Expression Bracket 1,2
M4 x 5mm screws (2)
ø4 x 8mm screws(2)
Bracket Spacer

*¹ White keys only.
*² Excluding accessories.



NOTE: Th

  is equipment has been tested and found to comply with the limits for a Class B digital unit, pursuant to part 15

of the FCC Rules. Th

  ese limits are designed to provide reasonable protection against harmful interference in a residential

installation. Th

  is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off  and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.



In case in the future your instrument gets too old to play/use or malfunctions beyond repair, please observe the instruc-
tions of this mark, or, if any question, be sure to contact your dealer or your nearest town or municipal offi

  ce for its proper

disposal.

 Th

  is class B digital apparatus complies with Canadian ICES-003.

 Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For the USA

For CANADA

For EU countries

Summary of Contents for XPK-130G















Reviews: