26
To create and save your own Presets, do the following:
1. Decide whether you want to change an Upper Manual or Lower Manual Preset.
NOTE! If you have the single manual XK 5, use the UPPER or LOWER PRESET SELECTOR Touch Tabs to select Upper
or Lower Presets.
2. Make whatever changes you want to the sound. You may use Drawbars, Percussion, Vibrato/Chorus, Leslie,
Overdrive, etc.
3. Touch and Hold the red RECORD Touch Button.
4. While touching and holding the red RECORD Touch Button, press the desired Preset Key. You may reprogram
any of the Presets from "C#" through "A." The LED above the Preset Key will blink "ON" and "OFF" approximately
8 times.
The example shown above shows the "F#" Preset Key.
5. When the Preset LED stops flashing and glows continuously, your new Preset has been saved.
Its always wise to give a unique Name to a Preset you have created. To see how to do this, turn to the next page.
Summary of Contents for XK-5
Page 1: ...1 Quick Start Guide...
Page 41: ...39...
