Hammond LESLIE 2102, Service Manual

Page: 5 / 22

3.DISASSEMBLING PROCEDURE
#2101/ #2102
3-1
B
A
A
B
B
C
D
CAUTION:
<CAUTION>
When reinstalling Motor assembly,make sure that
these screws are tight!
Screw name Part No.
00613-64030
00703-84030
00703-55020
00725-85000
00703-23018
A
a.REMOVAL OF TOP REAR BOARD ASSEMBLY:
Unfasten the four (4) machine screws labeled
in Figure 1 from the rear board.
<FIG.1>
A Tapping,Truss,Ø4x30
Machine screws,W Sems,M4x30
Machine screws,Bind,M5x20
Flange,M5(hexagon nut)
Machine screws,Oval head,M3x18
b.REMOVAL OF BOTTOM REAR PANEL
ASSEMBLY:
Unfasten the four (4) machine screws labeled
in Figure 1 from the rear panel.
<FIG.2>
c.REMOVAL OF ROTARY HORN ASSEMBLY:
Remove the Rear Panel Assembly by following the
procedure outlined in Section b.
Place the Leslie cabinet on it's side which has the
four (4) rubber feet installed on a flat surface.
Unfasten the four (4) machine screws from the
unit as shown in Figure 2.
d.REMOVAL OF MOTOR ASSEMBLY:
1.Remove the Rotary Horn Assembly following the procedure outlined in Section c.
2.Unfasten the four (4) machine screws as shown in Figure 3.
e.REMOVAL OF HORN DRIVER:
Remove the Motor Assembly following the procedure
outlined in Section d.
Disconnect (unplug) the wire assembly from the Driver.
Remove the Horn Driver by rotating the Driver in a
counterclockwise direction.
f.REPLACING THE CLOTH BELT:
1.
2.
3.
C
F
D
E
D
1.
2.
3.
Remove the Rear Panel following the procedure outlined in Section b.
Remove the belt from motor pulley.
Unfasten the four (2) machine screws from the rotary horn after remove the cloth belt as
shown in Figure 3.
E
F
1.
2.
3.
C
<FIG.3>
D
A
F
B
Disconnect the line cord from A.C. Source before disassembling any
portion of this product.