Hammond B-3, Owner'S Manual

Page: 84 / 130

84
*#1 $OM%OM$2OM Owner’s Manual
LESLIE
CONCEPT OF THE CABINET NUMBERS
Each Cabinet represents one virtual Leslie Speaker pre-
pared by the Leslie Parameter.
This parameter is the only Preset Parameter in this
mode.
‹ CABINET NUMBERS
1. CABINET NUMBER
Here you select the CABINET NUMBER to use in the Combination Presets.
The setting range is 1 - 8. The “
*
” will be displayed when the Leslie Parameters are
changed from this Cabinet Number.
‹ LESLIE PARAMETERS
2. CABINET NAME
This is for assigning the Cabinet Names.
Move the cursor by the [PARAM] button and select letters by the [VALUE] button.
In this mode, only the present value “Temporary” changes and there is no determining
operation. You must record the name by doing “Recording the Cabinet” as explained in
the next paragraph. Otherwise the data will be lost.
3. AMPLIFIER
This sets the type of the virtual power amplifier.
Solid Solid Solid Solid Solid: Simulated Solid-State Amplifier with a flat characteristic
T
TT TTube ube ube ube ube: Simulated Tube Amplifier with a warm characteristic.
In this mode, you make the settings for the built-in Leslie Effect.
There are many parameters for the built-in Leslie Effect. These
individual settings are not recalled by the Combination Presets,
or by bank settings. The built-in Leslie parameters are grouped
in macro-settings called “CABINETS”. You select the CABI-
NET NUMBER in the Combination Presets where this selection
is saved as part of the Preset.
To locate this mode:
1. Press the [MENU/EXIT] button to display the MENU. Then
select PAGE B by the [PAGE] button and press [3] LESLIE.
2. Or, move Leslie Speed Switch pressing the [MENU/EXIT] but-
ton.
1
2
3
4
5 6 7 8 9 10 11
12 13 14 15 16 17
18 19
20