10
COMPACT SELF-LEVELING CROSS LINE LASER WITH INTEGRATED TRIPOD LEG
OPERATION
4. LOCK MODE
This mode cannot be used to perform horizontal or vertical leveling, because the
laser lines are no longer self leveling.
a. To choose the lock mode, rotate the leveling mode ring until the indicator
aligns with “
” mark. Turn the tool on by depressing the power switch.
The laser lines are now locked, and are no longer self-leveling. Slope your
self-leveling cross line laser to project a straight line for reference. In this
mode, the laser lines are projected continuously, even if the slope angle
exceeds 4°.
b. To turn the laser off,
depress the power switch.
5. Using with the base
This cross line laser comes with
a base, which allow to be used
with commercial tripod stand (not
provided), use it as below:
a. Seek a commercial tripod
stand which allows to be
connected with this base,
the size of thread is 1/4”.
b. Thread base on the tripod
stand (not provided),
make sure they have been
connected firmly.
4
BASE
NOTCH
RAISED PART
METAL BLOCK
MAGNETIC
BLOCK
LEG
¼”
THREAD
ROTATIONAL
TABLE
