Hammerhead HG2200AT, Operator'S Manual

Page: 78 / 146

HG2200/HG2200AT Operator’s Manual
Set Up and Configure
Burst Pipe - 77
Set Up Mast
1. Remove mast from storage position.
2. Ensure cable has eye (shown).
3. If cable does not have eye, use a mast stop
(shown).
Moving parts can crush and cut hand or foot. Stay away.
To help avoid injury:
• Keep hands and fingers clear of the mast.
• Ensure no personnel are in the pit as equipment is lowered.
• Keep winch doors closed during operation.
j64om019w.eps
j64om024w.eps