background image

 

600-56-0859 

Rev 00 8/28/19 

Page 2 

 

I.

 

PARTS LIST 

 

 

REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. 

If there are any questions, call 1-855 HHTOUGH or email [email protected] 

II.

 

TOOL LIST 

1.

 

Basic Tool Kit 

2.

 

9/16” socket 

3.

 

3” extension 

4.

 

18mm socket 

5.

 

18mm wrench 

6.

 

5/8” socket 

7.

 

5/8” wrench 
 
 

Summary of Contents for 600-56-0859

Page 1: ...there are any questions call 1 855 HHTOUGH READ ALL SAFETY INSTRUCTIONS BEFORE INSTALLATION o FOLLOW ALL INSTRUCTIONS FOR PROPER ASSEMBLY o WEAR APPROPRIATE EYE PROTECTION o EXERCISE CARE WHEN LIFTING COMPONENTS o USE APPROPRIATE TORQUE FOR BOLTS o BLUE THREAD LOCKING COMPOUND IS RECOMMENDED ON ALL BOLTS SUGGESTED TORQUE VALUES FOR STEEL GRADE SAE 5 BOLTS ...

Page 2: ...MOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT If there are any questions call 1 855 HHTOUGH or email HHORDERS hammerheadarmor com II TOOL LIST 1 Basic Tool Kit 2 9 16 socket 3 3 extension 4 18mm socket 5 18mm wrench 6 5 8 socket 7 5 8 wrench ...

Page 3: ...ck you will have to remove the downward facing bolt to allow clearance to remove the tow hook bolt See Pic 3 Once the tow hook bolts are removed pull the tow hooks through the front of the bumper to remove them There are foam blocks between the bumper and the frame that can make this step difficult but the tow hook will pull through it Once removed set the tow hooks OE hardware and foam pieces to ...

Page 4: ...rpet or cardboard in front of the truck Layout bull bar as shown Use hardware kit 92 to attach the bull bar to the frame mounts Use one 3 8 16 bolt one 3 8 lock washer and one 3 8 flat washer per hole Install all bolts Using a 9 16 socket with 3 extension tighten all bolts Use torque values on page one 4 Route light wires down the uprights and on top of the frame mount into the truck s bumper Secu...

Reviews: