Hammerbacher VXBHM, Operating Instructions Manual, Page: 50 / 124

XMST 50
5. Workplace assembly, page 120-124
5.1 Assembly note
Note:
The desk can be infinitely adjusted using the electric motor between
heights of 720 and 1190 mm.
Please ensure before each initial operation,
• that the disk was correctly assembled
• that the controls are connected to the motor via the cables
• that all the safety regulations are observed
• before initial operation it is necessary to carry out a reset process (RESET)
• you can find the directions in the assembly instructions
Assemble the frame using the included tools.
5.2 Check the delivered objects
• Open the box carefully
• Do not use long knives as they could damage the components.
• Check the contents are complete using the list on page 120 .
• Check the contents for visible transport damage, paying particular attention to the electric
cables. In the event of damaged or incorrect components please contact our specialized
dealer.
• Do not try to assemble the frame if there is any damage or any incorrect components.
5.3 Packaging
Dispose of the packaging in domestic waste / cardboard.
Please observe the statutory waste disposal regulations.
Assembly instructions XMST 12/16/19/2E/22