23
!
"
#
!
!
"
"
#
#
Bandsaw
N3700 e-classic / N3800 / N4400
Fig. 7-6: Saw blade guide
!
Bearings
"
Support roller
#
Clamping screws
The side guide rollers should touch the saw blade slightly
so as to obtain a straight and vibration-free cut.
The rear support roller prevents the saw blade thrusting
backwards whilst cutting.
To adjust the position of the rollers, simply loosen the
clamping screw.
7.5 Adjusting the saw blade guide
Fig. 7-5: Bearings
7.5.1 Height adjustable protection device
The upper saw blade guide has to be lowered as
closely as possible to the work-piece (5–10 mm). To set
the height, open the clamping screw and turn the hand
wheel until the desired height has been reached. Tighten
the clamping screw once again.
!
Clamping screws
"
Blade guide height adjustment
Warning! Risk of injury!
Do not change settings whilst the machine is in operation!
Operation
7.5.2 Saw blade guide upper / down (Optional with the N3700)
