51
!
"
#
/
(
"
#
%
$
&
Saw-Spindle Moulder
B3 / B3 e-classic
Required tools:
• Hex key 8 mm
• Spanner SW 22 mm
• Hex key 4 mm
1.
Prepare to change tooling.
2.
Move the grooving tool to the lowest position.
3.
Unscrew the 4 screws with the allen key.
4.
Remove the wooden insert.
5.
Hold the circular saw flange with an open-end
spanner.
6.
Loosen the socket head cap screw with an hex key.
(8 mm )
7.
Remove the socket head cap screw and flange.
8.
Remove the grooving tool.
9.
Remove the spacer ring from the saw blade arbor if
present.
!
Wooden insert
@
Screws
#
Hex key 4 mm
$
Hex key 8 mm
%
Grooving tool
&
Spanner
Making adjustments and preparations
10.
Place the synthetic insert into position.
11.
Screw in the 4 screws with the Allen key.
12.
Mount the rear flange.
13.
Assemble the saw blade.
/
Synthetic insert
(
Flange
8.11.3 Unchucking the grooving tools – Retool to a saw blade operation
Fig. 8-29: Wooden loading board
Fig. 8-30: Remove grooving tooling
Fig. 8-31: Rear flange/Loading board
