Hammer Strength PT-AB, Owner'S Manual

Page: 16 / 26

How to Adjust Seat
A properly adjusted seat is important in any bike-oriented exercise activity. If the seat is too close, excessive strain will
be placed on the knees and quadriceps muscles. If the seat is too far, the resulting reaching action will irritate the feet,
ankles, hips and knees.
1. Sit on the seat and place the balls of the feet on the pedals.
An optimal position allows movement through the bottom of the stroke without locking the knees, shifting in the
seat or forcefully extending the hips. The knees should have a slight bend at the point of fullest leg extension.
2.
To adjust seat height, loosen seat adjustment knob, hold seat, then raise or lower.
Item Description Qty
1 Seat 1
2 Seat adjustment knob 1
CAUTION: Do not attempt to adjust the seat while pedaling the bike or sitting on the seat. Doing so may
cause injury or result in an uncomfortable workout.
3. Tighten seat adjustment knob.
4. To adjust seat horizontally, unlock horizontal adjust lever by rotating counter clockwise.
Item Description Qty
1 Seat 1
2 Horizontal adjust lever (shown in locked
position)
1
3 Horizontal seat rail 1
5.
Adjust seat forward or backwards as needed.
The knee of your forward-facing leg should be positioned directly above the center of the pedal. If this does not
correspond to your bike‘s setting, align the horizontal saddle adjustment to the front or rear in order to attain this
seat position.
6. Lock horizontal adjust lever by rotating clockwise.
Page 14 of 22