Hammer Strength PT-AB, Owner'S Manual

Page: 14 / 26

Set Elevation for Products Location
Perform this procedure to display the correct resistance levels. The resistance is based on air densities at different
elevations. This is required when installing the unit, replacing the console, or if the unit has been moved to a different
elevation.
1. Turn the console on by pedaling or moving the handles.
2. Press the MENU button on the console to access the PROGRAMS screen.
3. Press the MENU button and the UP ARROW button simultaneously for 3 seconds to enter the SETTINGS menu.
Item Description Qty
1 MENU 1
2 UP ARROW 1
4. Press the DOWN ARROW button to navigate to SYSTEM menu.
5. Press the OK ARROW to select.
6. Press the DOWN ARROW button to navigate to ELEVATION menu.
7. Select elevation value closest to current location of the bike.
8. Press the OK ARROW to select.
9. Press EXIT to exit settings.
Page 12 of 22