Install Square Connector
1.
Remove lower bolt, backing washer, washer, and lock nut securing front crossmember to training upright on one
rack using two 3/4" wrenches.
Item
Description
Qty.
1
Front Crossmember
1
2
Training Upright
1
3
Bolt, HHB .5 x 4.5
1
4
Backing Washer
1
5
Washer, 1/2"
1
6
Lock Nut, 1/2"
1
2.
Repeat Step 1 to remove hardware from second rack.
3.
Install bolts, washer, backing washer, step washers, and lock nuts securing square connector between training
uprights of two racks using two 3/4" wrenches..
Item
Description
Qty.
1
Square Connector
1
2
Training Upright
1
3
Bolt, HHB .5 x 4.5
2
4
Lock Washer, 1/2"
1
5
Backing Washer
1
6
Step Washer, 1/2"
2
7
Lock Nut, 1/2"
2
Tighten hardware to 20-25 ft-lb (27-34 Nm).
4.
Repeat Step 3 to install square connector to second rack.
Page 22 of 29
