HAMMAR MA1 PRODUCT INFORMATION
OK
X
2
3
REMEMBER THE ANNUAL SERVICE OF YOUR LIFEJACKET
All in
fl
atable lifejackets need an annual service. Check the instructions from
your lifejacket manufacturer.
Scan the QR code or visit www.cmhammar.com/in
fl
ator for instructions,
fi
lms
and support for the Hammar Hydrostatic In
fl
ator.
SUPERIOR EQUIPMENT ON YOUR TERMS
Despite its small size, the in
fl
ator is of huge importance for your lifejacket’s
performance. The in
fl
ator’s mission is to puncture the gas cylinder and give your
lifejacket full buoyancy when you need it. The Hammar M2 In
fl
ator has some
unique features that are designed to improve your safety, even during the roughest
conditions at sea.
FEATURES OF THE HAMMAR LIFEJACKET INFLATOR
The Hammar M2 In
fl
ator has a unique low-pro
fi
le design and is light in weight. The
in
fl
ator is developed to meet the requirements for both commercial and leisure users.
The Hammar M2 is strictly manual and will not activate when partially or completely
submerged in water. Only you decide when and where you would like the in
fl
ator to
activate.
• Single point indicator
• Only in
fl
ates on your terms
• No service requirements for the Hammar In
fl
ator for 5 years
HOW DOES THE HAMMAR INFLATOR WORK?
Activate the Hammar In
fl
ator manually by using the pull-tab, and the lifejacket will
reach full buoyancy within seconds. The in
fl
ator is designed to ensure fast and reliable
activation when you need it. It is important that you don the lifejacket according to the
manufacturer’s instructions in order to secure the function of the lifejacket.
SINGLE POINT INDICATOR CLEARLY SHOWS THE STATUS OF YOUR HAMMAR INFLATOR
When the single point indicator is green (
)
the in
fl
ator is ready for use. After the manual
activation the indicator turns red
( ) and the in
fl
ator must be replaced. Always check
the single point indicator before using your lifejacket.
OUT OF WATER PERFORMANCE
IN WATER PERFORMANCE
TEMP: +65°C
–30°C
HIGH
HUMIDITY RESISTANCE
HIGH
RAIN RESISTANCE
HIGH
WAVE RESISTANCE
GB
SERVICE / MAINTENANCE
The Hammar In
fl
ator needs no service or
maintenance. Just ensure that the in
fl
ator is
replaced after the
fi
ve years expiry date or when
the single point indicator is red.
IN WATER PERFORMANCE
Activate the Hammar In
fl
ator manually by using
the pull-tab. Make sure you know how to reach the
pull-tab on your lifejacket.
REARMING KIT
Ask your dealer for the rearming kit suitable for your lifejacket.
REPACKING
Before packing the lifejacket according to the manufacturer’s instruction, de
fl
ate the
lifejacket through the oral tube. Make sure that
all residual air is pressed out from the
bladder.
Manual activation
Expiry Date
