Hamlet XZMP3128, User Manual

Page: 23 / 23

6.7 Password:
(1) Set up password: Choose [Tools]/[Set password to protect account info]
(2) Cancel password: Choose [Tools]/[Set password to protect account info].
Leave it blank and click “OK”, then the existing password will be canceled.
Important Notices
：
(i) In OS Windows 98/98SE, if you don’t set up installation firstly, system will
ask you to put driver disk for running installation. Be sure to unplug
MagicStar MP3 before running setup programs. If you install the driver with
MagicStar MP3 plugged, it may cause setup error or failure.
(ii) If you plug MagicStar MP3 into the USB port. System can find MagicStar
MP3, but you are unable to access MagicStar MP3. Please FORMAT
MagicStar MP3.
(iii) Before unplugging MagicStar MP3 from the USB port in
Windows
ME/2000/XP , make sure you go to the right hand bottom of the screen to
stop the USB device. Otherwise, it may result in losing data that you
have saved
on MagicStar MP3. (Please refer to 2.6.)
(iv) Linux uses a so-called "USB Manager", which does automatically load
kernel modules (drivers) for USB devices. It loads only drivers for devices
that are present on the USB bus to reduce memory usage. Per default,
the USB Manager does not come with the USB Drive pre-configured.
However, you can easily configure the USB Manager to automatically
recognize the USB Drive yourself. Just add the following to the
configuration file,
usbmgr.conf (usually in /etc/usbmgr): vendor 0xd7d product 0x100
module scsi_mod, usb-storage
This line identifies the USB Drive and tells the USB Manager to load the
SCSI as well as the USB storage module. The SCSI module is needed in
order to talk to both SCSI and USB storage devices, while the usb-storage
module is needed to talk to USB storage devices.
Do not forget to either reload the USB Manager's configuration or to restart the
USB Manager (for instance, do as root: /etc/init.d/usbmgr reload).
22