1. Unscrew the two screws to remove the
back panel.
2. Draw the back panel/base plate out of the
aluminum enclosure.
5. Place the Hard Drive in the base plate
and fix it with the 4 screws.
5. Slide and push the HD/Base Plate into
the aluminum enclosure, then fix the back
panel with the screws. The enclosure is
now ready to use.
3. Connect the 44-pin IDE connector and
the power connector from the base plate
securely to the Hard Drive.
4. In case of SATA Hard Drive, replace the
IDE cables with the SATA ones enclosed in
the package.
Hard Disk Installation
Dear Customer,
thanks for choosing an Hamlet product. Please carefully follow the instructions for its use and
maintenance and, once this item has run its life span, we kindly ask You to dispose of it in an
environmentally friendly way, by putting it in the separate bins for electrical/electronic waste, or
to bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and components in compliance
with ROHS directives 2002/95/CE; with RAEE Directives: 2002/96/CE, 2003/108/CE Italian
Legislative Decree 2005/151 and below EEC Directives:
EN 55022: 2006 + A1: 2007
EN 61000-3-2: 2006
EN 61000-3-3: 2008
EN 55024: 1998 + A1: 2001 + A2: 2003
Trademarks
All trademarks and company names mentioned in this manual are used for description purpose
only and remain property of their respective owners.
Changes
The material in this document is for information only and subject to change without notice.
Important information
Any loss, corruption or destruction of data while using a Hamlet drive is the sole responsibility of
the user, and under no circumstances will Hamlet be held liable for the recovery or restoration
of this data. To help prevent the loss of your data, it is highly recommended that you keep TWO
copies of your data; one copy on your external hard drive, for instance, and a second copy
either on your internal hard drive, another external hard drive or some other form of removable
storage media.
Introduction
Features
● External aluminum enclosure with Hi-Speed USB 2.0 interface (480Mbps)
● Supports 3.5” SATA and IDE HDD of any capacity
● Power supply: Input AC 100-240V 50-60Hz, Output DC 12V/5V
System Requirements
● PC or Mac computer with one free USB port
● Windows 98SE/ME/2000/XP/Vista, Mac OS 8.6 or above, Linux (kernel 2.4.18 or above)
Package content
● 3.5” SATA/IDE HDD enclosure
● Power supply
● USB cable
● User’s manual
2
3
