Hamlet HRDSL512P4 Quick Start Manual Download Page 2

 

 

 

 

For more detailed instructions on configuring and using 
the ADSL2+ Modem/Router, please refer to the on-line 
manual. 

 

Package Contents 

 ADSL2+ 

Modem/Router 

 

    CD-ROM containing the on-line manual 

 

 RJ-11 

ADSL/telephone 

Cable 

 

  Ethernet (CAT-5 LAN) Cable 

 

  AC-DC power adapter (12VDC, 1A) for (Wireless) ADSL Router with 4-port Switch 

AC-AC power adapter (12VAC, 1A) for ADSL Modem/Router with Single Ethernet Port

 

  This Quick Start Guide

 

 

 
 
 
 
 
 
 
 
 
 
         

 

 
 

Warning

 

 

Do not use the ADSL2+ Modem/Router in high humidity or high
temperatures. 

 

Do not use the same power source for the ADSL2+
Modem/Router as other equipment. 

 

Do not open or repair the case yourself. If the ADSL2+ 
Modem/Router is too hot, turn off the power immediately and 
have it repaired at a qualified service center. 

 

Avoid using this product and all accessories outdoors. 

 
 
 

 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attention

 

 

Place the ADSL2+ Modem/Router on a stable surface. 

 

Only use the power adapter that comes with the package. Using   

a different voltage rating power adaptor may damage the router.

 

1

  

 

Summary of Contents for HRDSL512P4












Reviews: