manualshive.com logo in svg

Hamlet HRDSL512, User Manual

Share
Download
Hamlet HRDSL512 User Manual Download Page 52

User Manual 

HRDSL512/HRDSL512P4 

52 

4.6.3 Statistics 

Read-only information here includes port status and packet specific statistics. Also 
provided are "Transmit Statistics" and "Receive Statistics". 
 

 Ethernet

 

 

 

 Interface:

 

This field displays the type of port

 

 

Transmit Frames: 

This field displays the number of frames transmitted in the last 

second.

 

 

Transmit Multicast Frames:

 This field displays the number of multicast frames 

transmitted in the last second.

 

 Transmit total Bytes: 

This field displays the number of bytes transmitted in the last 

second.

 

 Transmit Collision:

 This is the number of collisions on this port.

 

 Transmit Error Frames: 

This field displays the number of error packets on this port. 

 

Receive Frames: 

This field displays the number of frames received in the last second.

 

 Receive Multicast Frames: 

This field displays the number of multicast frames received 

in the last second.

 

 Receive total Bytes: 

This field displays the number of bytes received in the last 

second.

 

 Receive CRC Errors:

 This field displays the number of error packets on this port.

 

 

Receive Under-size Frames: 

This field displays the number of under-size frames 

received in the last second.

 

 

 
 
 

Summary of Contents for HRDSL512

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands