Save/Reload Settings
You can save current settings of AP to a file or reload the settings from the file which was
saved previously. Besides, you could reset the current configuration to factory default
1. Select the “
AccessPoint\Other\Save/Reload Settings
” web page.
Save Settings to File:
Click
SAVE..
to save the current configuration to file.
Load Settings From File:
Click
Browse…
if you want to load a pre-saved file, enter the file
name with the correct path and then click on
Upload
. Or click
Browse…
to select the file.
Figure 1
Reset:
Click to cancel the action.
Note:
After you load setting of AP from file, you had better check the IP of AP from terminal
console program by “ipconfig br0” command in case you can’t connect to the web server of
AP because it is changed.
8
