9
2.2
Connecting the Camera to LAN/WLAN
Use the provided Ethernet cable to connect the camera to your local area
network (LAN).
When you connect the AC power adapter, the camera is powered on
automatically. You can verify the power status from the Power LED on the
front panel of the camera.
Once connected, the Link LED starts flashing green light and the camera
is on standby and ready for use now.
When the camera is powered on, the camera will automatically search any
access point with “default” SSID.
NOTE
If the camera cannot connect to your wireless network, you need to install
the camera in LAN and proceed with WLAN settings.
