7
2. Hard disk installation
The installation of the hard disk in the HEXD25U3KK enclosure can
be performed without screwdriver as the box consists of two parts
that fit together.
The enclosure comes with the two plastic parts already separated.
To install the disk, proceed as follows.
1. Place the hard disk drive inside the enclosure and connect it
carefully to the SATA connector.
2. Put the bottom part of the enclosure on the other making sure
to properly align the joints.
3. Press firmly around the perimeter of the two plastic parts to
completely close the enclosure.
4. The hard disk installation is complete.
Important Note:
the HEXD25U3KK enclosure, once fully closed,
can be opened only by forcing the latches consequently causing the
break of the plastic case.
3. Using the device
3.1 Setting the hard disk password
The hard disk encryption is enabled through the setting of the
password. To setup the enclosure’s password for the first time,
please follow below procedure.
WARNING!
•
The password setup procedure deletes all existing partitions
and data stored in the hard drive.
•
We strongly recommend to backup all existing data stored in
the hard drive before setup.
•
Before setting up the hard drive encryption, all the existing
partition should be deleted.
Summary of Contents for HEXD25U3KK
Page 5: ...5 Product overview...
