10
Wireless Microphone – Parts Description and Specifications
(1) Mesh cover
(2) Power LED Indicator
(3) Display
(4) Power Switch
(5) Plastic Body
(6) Battery Cover
(7) Cap
4. Wireless Transmitter
4.1 Wireless Handheld Microphone (UHF 3V) Parts Description
1. Open battery cover (6) and insert batteries (insert carefully paying attention to positive and
negative poles). Close the battery cover.
2. Turn on microphone power switch (4) and the power LED indicator (2) will flash on once then
off. When indicator (2) stays red, it indicates battery power is low. Please change the battery.
3. When switching on microphone power, please operate the switch step-by-step.
When the switch moves to the center, please wait for at least 0.2 seconds or it may
cause noise. Then only - move to on position.
4.2 Wireless Handheld Microphone Specifications
Microphone Type
Dynamic Handheld
Frequency
902MHz-928MHz
Spurious Emissions
>55dBm
Power Source
2 x “AA” 1.5V Batteries (included)
Operating Time
Approx. >6 Hours
On-board Indicators
Power Status/On/Off Switch
Dimensions
Ø 50mm, L 260mm
Weight
0.35 lbs
Summary of Contents for VENU100A
Page 2: ...www HamiltonBuhl com ...
